Rabu, 18 Maret 2009

The Best Way To Beat The Car Business!

What is the greatest expense in the average American’s life?

His house?

Heck, no. Generally speaking, houses are great investments, not expenses.

They appreciate.

The biggest expense is the automobile, in absolute dollars and as a percentage of annual income. It depreciates, as you know, a lot and especially quickly, particularly if it is new or slightly used.

Just out of college, I took a job at an upscale car leasing company in Beverly Hills, California. And if you just read the opener to this article you saw a summary of a lecture I was given by the owner of that firm.

He went on to advise: “Gary, do you know how to BEAT the car business?”

“Nope.”

“Buy the best car you can, hold onto it forever, and keep it in decent running condition; that’s how.”

If you think he was wrong, consider this. Mark O. Haroldsen is the author of the book, “The Courage To Be Rich,” and he mentioned that be bought a very used, but still great looking Rolls-Royce.

He drove it for a number of years, getting thousands of admiring glances, and then he sold it for TWICE what he paid!

This smart guy took what is typically the biggest expense in American life and turned it into a PROFIT!

Now, you know the secret to beating the car business.

But do you have the courage to withstand those new car rebates and low interest loans in order to do so?

Dr. Gary S. Goodman, President of Customersatisfaction.com, is a popular keynote speaker, management consultant, and seminar leader and the best-selling author of 12 books, including Reach Out & Sell Someone® and Monitoring, Measuring & Managing Customer Service, and the audio program, “The Law of Large Numbers: How To Make Success Inevitable,” published by Nightingale-Conant. He is a frequent guest on radio and television, worldwide. A Ph.D. from USC's Annenberg School, a Loyola lawyer, and an MBA from the Peter F. Drucker School at Claremont Graduate University, Gary offers programs through UCLA Extension and numerous universities, trade associations, and other organizations from Santa Monica to South Africa. He holds the rank of Shodan, 1st Degree Black Belt in Kenpo Karate. He is headquartered in Glendale, California, and he can be reached at (818) 243-7338 or at: gary@customersatisfaction.com. For information about coaching, consulting, training, books, videos and audios, please go to http://www.customersatisfaction.com

Article Source: http://EzineArticles.com/?expert=Dr._Gary_S._Goodman

By Dr. Gary S. Goodman Platinum Quality Author

Use Your Roadway ESP to Avoid Car Accidents, Top Speaker Advises

When I was in Little League, I was transformed from being an outfielder and an occasional third baseman into a catcher.

Our aging receiver was moving up to Pony League, so the always forward-thinking manager and coach of the Dodgers, started to groom me to take over, which I did with relish and some distinction for two years.

Along the way, I had a blast because you may or may not know this: Catchers rule the game of baseball.

When a coach has confidence in us, he or she lets us position the fielders, call for the pitches we think are appropriate from one moment and situation to the next, and really control much of the pace of the game.

Before long, I could size-up an opposing player from how he walked up to the plate, where he positioned his feet and the way he took his practice swings. Then, I’d call for specific pitches to ideal locations to exploit his weaknesses.

Most of this was intuitive, but it was based on real world data, as I rapidly interpreted and adjusting to the behaviors batters revealed to anyone who paid sufficient attention.

Later, when practicing martial arts, I’d refine this opponent-analysis a significant amount, enabling me to earn a Black Belt in Kenpo Karate after eight years.

What I’ve found is the same perceptual ability to size-up an opponent’s intentions and likely behaviors serves me well in traffic, as a driver. When I turn on my attention, I can almost perfectly predict who will try to cut in front of me, suddenly make an un-signaled lane change, or stop abruptly.

Occasionally, my awareness can “see around corners,” and I’ll feel it’s important to slow down to a near crawl, and when I do, sure enough, there is a disabled vehicle or other obstacle awaiting me that comes into view, that I have more than enough time to avoid crashing into.

I believe we all have an innate version of Roadway ESP, but we just haven’t activated it.

The next time you’re in traffic, deliberately start predicting what the drivers to the sides, the rear, and front are going to do next.

You’ll come to see certain cars getting WIDER within their lanes, and this will often be a precursor to a lane change, sudden or not.

Your eyes might become fixed in the rearview on an approaching car that is heading toward you at too fast a clip, and this will induce you to move forward a little or to the side to give him room to miss you.

This happened to me in Florida, two days ago, and sure enough, if I hadn’t peeled to the left, a pickup would have smashed into me. After the near miss, another driver, encamped at the traffic signal saw what had happened and just shook his head in disbelief.

I’m convinced everybody has Roadway ESP to at least some extent, so use yours, and you’ll enjoy safer motoring!

Best-selling author of 12 books and more than 900 articles, Dr. Gary S. Goodman is considered "The Gold Standard"--the foremost expert in sales development, customer service, and telephone effectiveness. Top-rated as a speaker, seminar leader, and consultant, his clients extend across the globe and the organizational spectrum, from the Fortune 1000 to small businesses. He can be reached at: gary@customersatisfaction.com

Article Source: http://EzineArticles.com/?expert=Dr._Gary_S._Goodman

By Dr. Gary S. Goodman Platinum Quality Author

Selasa, 17 Maret 2009

Online Bus Ticket Booking - Gets a New Trend of Skill With Budget Travel

Bus ticket booking was a bigger problem in India. And bus is one of the main affordable options to travel one place to another. The first choice of people in India which belongs to common people they preferred bus to travel one city to another city with affordable rates. But it was not very easy to book bus tickets in quick way or in less time. A numbers of people frequently use bus services in India to traveling in different cities and states in India. Traveling by bus services is more popular for the use of tourism, tours by travel services provider in India. But in the present situation as the technologies emerged, we have a comfortable way of booking bus tickets online.

Now, it is so simple and easy to book bus tickets online in just a few minutes of time period. It's a great advantage in the internet field that bus ticket booking were involved and using to book tickets through online services. It's a great useful for busy travelers who don't have enough time to book/buy tickets to go through at ticket counters.

Booking tickets through ticket counters takes so much precious time which you do not desires to give it. There is no need to go through at ticket counters or met personally with travel agents or agencies. Just go through online and book your tickets as per your choice and needs without any hassle.

There are many online sites which provide Online bus ticket booking services to consumers with a simple steps following. Travel agents and travel companies are together now launching their websites and providing travelers to book their tickets at ease. There are various types of bus services available as per your choice, needs and budget on Bus ticket booking. Look out the facilities when you book bus tickets online these are; A.C luxury, express, deluxe, super, Non A.C luxury, private, intercity, and Volvo A.C buses are available. Book your tickets for Delhi, Mumbai, Chennai, Agra, Goa, Nagpur, Kolkata, Bangalore & many other cities and towns in India. Book your bus tickets online now with a grin on your face.

Louise Carlo has got experience in writings articles in various topics like; entertainments, information, gadgets etc

http://www.onlinebusticketbooking.in

Article Source: http://EzineArticles.com/?expert=Louise_Carlo

By Louise Carlo

Does Your Baby Monitor Let You Hear Your Baby Crying?

One Baby Monitor is a Palm application destined to help you keep an eye on your children. This is simply a radio transmitter set to a fixed frequency which emits an FM (Frequency Modulation) signal when switched on. It is composed of two parts, a transmitter and a receiver.

If seeing as well as hearing your baby is what you need in order to have real peace of mind then An audio/video is the one for you. The best one is one that best fits your needs, lifestyle, and budget. The ultra-portable Respisense model is easy to operate and works wherever baby may fall asleep.

Traditional baby breathing and baby movement units are ineffective in most baby sleeping situations outside a cot or baby bed. Some of these come with two receivers so both parents can listen to their baby from different rooms in the house at the same time.

Audio baby monitors with an intercom button allow you to soothe or entertain your baby while you are en-route to the nursery. Other audio units have a movement and breathing sensory pad that you place under the crib mattress.

Many of them have low battery indicator lights and sound-activated lights. Most of these transmit on a 49 MHz frequency. This can lead to interference from other radio operating devices, such as cell phones, older cordless phones, or other units in your neighborhood that run on the same frequency.

A SIDS unit is a regular baby monitor that could be an audio model or a audio/video model. The SIDS is different from normal ones because if your babys breathing becomes irregular or stops the SIDS baby monitor will set off an alarm to wake you up so you can get your baby to a hospital. This is an electronic device that allows you to hear your baby crying even if you are in another room.

Video codecs are excellent candidates for applications with smart, reliable Blackfin processor-based wireless modems. Video baby monitors should include one tabletop of wall-mounted camera, at least one video monitor and an AC adapter. Get the low-down on this type and the up and coming video units.

There are several factors to consider when choosing one of these units: If you live in a large house, or you want to monitor your baby from far away, choose a one with longer range. If you have many wireless devices in your house, choose one that is digital.

If you wish to monitor multiple rooms at the same time, choose a multi room baby monitor if the ability of seeing your child is very demanding, choose a video unit If your baby was born prematurely, or seriously ill, or you are worried about SIDS, choose a breathing baby monitor.

In Conclusion what ever you choose of one that is properly cared for, will work for you in most situations. Discuss it with your health professional and follow his advice if you feel comfortable with the advice. If not then questions him until you are satisfied.

Visit the Jim Woodall Baby Monitor Website lots news and video feeds for you at:
http://baby-monitors.jwoodl.com

If you are into Affiliate mktg visit the website at:
http://freegiveaways.jwoodl.com/index.html get free ebooks on PPC, Ebay, and Affiliate mktg

Article Source: http://EzineArticles.com/?expert=Jimmy_Woodall

By Jimmy Woodall

Overview of a PV Solar Energy System

A typical Solar pv electrical system is described to refresh our basic electrical knowledge. This knowledge will allow us to be comfortable with the design of our pv solar system and have confidence that it is not over or under designed.

The pv Solar Energy System: A pv Solar system has the four major components.

1) THE SOLAR PANEL: This is the component that receives photons from the sun and converts the photon energy into electricity. The panels are rated in Watts.

2) CHARGE CONTROLLER: This component insures that the storage batteries are not overcharged and damaged.

3) STORAGE BATTERIES: The batteries store our collected electricity until we use the energy to power our appliance. Our electricity is store as the potential energy rated in Volts.

4) INVERTER: This component changes the current from our batteries, which is stored in direct current (DC), to an alternating current (AC) which is compatible with our household appliance.

Conversion of Sunlight to Electricity: Photovoltaic energy is the conversion of sunlight into electricity through a photovoltaic (pv) cell, commonly called a solar cell. A photovoltaic cell is a non mechanical device usually made from silicon alloys.

Sunlight is composed of photons or particles of solar energy. These photons contain various amounts of energy corresponding to the different wavelengths of the solar spectrum. When photons strike a photovoltaic cell, they may be reflected, pass right through, or be absorbed. Only the absorbed photons provide energy to generate electricity. When enough sunlight (energy) is absorbed by the material (a semiconductor), electrons are dislodged from the material's atoms. Special treatment of the material surface during manufacturing makes the front surface of the cell more receptive to free electrons, so the electrons naturally migrate to the surface.

The output of a solar panel is usually stated in watts, and the wattage is determined by multiplying the rated voltage by the rated amperage. The formula for wattage is Volts times Amps equal Watts. So for our example, a 12 volt - 60 watt solar panel measuring about 20 X 44 inches has a rated voltage of 17.1 and 3.5 amps .

V X A = W

17.1 volts times 3.5 amps equals 60 watts.

Our solar panel rated as 60 watts exposed to 6 hours of peak sun will produce 360 watt hours of power per day. An typical; home will require 4000 watts of DC generating power to produce sufficient kwh to cover annual electrical consumption. This equates to 67 - 20 X 44 inches solar panels from the example above.

Wiring the System:

Solar panels can be wired in series or parallel to increase voltage or amperage respectively, and they can be wired both in series and in parallel to increase both volts and amps. Series wiring refers connecting a positive terminal of one panel to the negative terminal of an adjacent panel. This connection will produce voltage as the sum of the two panels and the amperage will remain the same as the output panel. Two 12 volt and 3.5 amp panels wired in series will produce 24 volts at 3.5 amps.

Solar panels can be wired in parallel by connecting positive terminals to positive terminals and negative terminals to negative terminals. Two 12 volts and 3.5 amps panels wired in parallel will produce 12 volts and 7 amps.

A series/parallel wired system refers to doing both to the above. This wiring scheme would produce 24 volts and 7 amps from our two 12 volt and 3.5 amps panels.

Inverter:

An inverter is a device which changes DC power stored in a battery bank to standard 110 / 240 volts AC. Nearly all our lighting, appliances and motors are designed to use AC power. Inverters come in sine wave and modified sine wave output. Most 11o volts devices can use the modified sine wave output. However, special devices that use lasers or silicon controlled rectifiers will require the pure sine inverter which is more expensive.

Auto transfer switching is a common internal feature which enables switching from one AC source to another and / or from utility power to inverter power for designated loads. Battery temperature compensation, internal relays to control loads, automatic remote generator starting and stopping and many other programmable features are available.

Charge Controller:

A charge controller monitors the battery's state of charge to insure that when the batteries need current when required and also insure that the batteries are not overcharged. Connecting a solar panel to the batteries without a charge controller seriously risks damaging the batteries and potentially causing a safety concern.

Charge controllers are rated based on the amount of amperage they can produce from a solar array. If a controller is rated at 20 amps you can connect up to 20 amps of solar panel current output. Advanced charge controllers utilize Pulse-Width-Modulation which insures the most efficient battery charging and extends the life of the batteries. Even more advanced controllers can include Maximum Power Point Tracking which maximizes the amount of current going to the batteries by lowering the panel's output voltage.

Many advanced charge controllers offer Low Voltage Disconnect and Battery Temperature Compensation as optional features. The Low Voltage Disconnect allows the terminals to be voltage sensitive. If the battery voltage drops too far the panels are disconnected thus preventing damage to the batteries. The Battery Temperature Compensation adjusts the charge rate based on the temperature of the battery since batteries are sensitive to temperature variations above and below about 75 F degrees.

Batteries:

The batteries for our system should be Deep Cycle units which are designed to be discharged and then re=charged hundreds or thousands of times. Batteries are rated in Amp Hours (ah) and are usually rated at 20 or 100 hours. Amps hours refer to the amount of current which can be supplied by the battery over the periods of hours. An example would ne a 350 ah battery could supply 17.5 continuous amps over a 20 hour period.

Like solar panels, batteries are wired in series and/or parallel to increase voltage to the desired level and increase amp hours.The capacity of the battery amp hour capacity requires careful sizing for the conditions under consideration. Longest periods of no sun or cloudy conditions, availability of generator or grid backup or a standby generator with battery charger are among the conditions for consideration. The size of the battery bank will depend on the storage capacity required, the maximum discharge rate, the maxium charge rate, and the minimum temperature at which the batteries will be used.

Overall Design:

As with all electrical systems there are voltage losses as the electricity is carried across the wires, batteries and inverters and these losses are dependent on the efficiency of each component. These efficiency losses vary from component to component, and from system and can be as high as 25 percent. A trained technician will be required to fine tune the system for efficiency.

I have a BS and MS in Metallurgical Engineering. Thirty six years spent in the development of semiconductors. Business experience in start up business plan. Currently, an oyster farmer and interested in helping the environment by deploying solar energy. Please visit my Blog http://environmentalhelp.typepad.com/ for further discussions

Article Source: http://EzineArticles.com/?expert=Paul_Calhoun

By Paul Calhoun Platinum Quality Author

Why Not Go Green

To go green or not to go green, that is the question. Saving energy equals saving money. This is quickly becoming a bigger and bigger topic these days as most people blame the government for not doing enough about it. Yes, the government should spend more money on research and development in alternative fuels. However, the real blame is on you. There are hundreds of ways to do your part. I will give you just a few that we found to be easy, inexpensive and in return will save you money.

By changing the light bulbs in your house to compact fluorescent lights (CFLs) you can save about $45 in electricity cost per light bulb. The average home in has roughly 15 active light bulbs. If homeowners were to change every light in their houses to CFL bulbs, they would save about $675 on electricity costs during the life of the light bulbs.

Shading can save up to 40% of cooling costs. Planting trees in strategic areas of your yard will not only increase the value of your home but will also save about $100 - $250 a year in energy costs. Homeowners will benefit the most from planting trees on the west and south sides of their houses. You can also call your local energy provider and they will often send an expert out to help you coordinate your energy saving efforts. Usually for free! Putting up drapes makes the house look better and blocks out a lot of heat in the summer and keeps the heat in during winter.

These experts will also help you with finding the heat sources in your house. They will pin point where exactly you are producing the most heat which may entail that your AC will run longer. For example, placing a lamp by the television causes two heat sources to be next to each other, which generates more heat. Turning televisions, VCRs, and DVD players off, not just leaving them on standby, makes a significant difference in how much you will pay on your next utility bill. Turning your computer off overnight and during other times it is not in use, can also help save energy.
Thinking of buying a new washing machine? If you replace a washing machine that is older than 1994, you will save up to $110 a year on your utility bill. When you buy an appliance, Energy Star approved, that item can save you up to 50% than on non Energy Star approved appliances. All new washing machines come standard with the Energy Star and can be purchased for less than $1000. These washers will not only conserve energy but will also conserve water as well.

Other ways to conserve water is by changing your shower head. For an investment of $10 or less you can save $50 to $75 per year on water bills and $20 to $50 more per year on energy bills (depending on your current showerhead and utility rates). Every new showerhead should pay for itself within the first year.

Do you like money? I gave you only a few of the many ways to reduce your monthly bills. What have you done to help out the environment?

http://www.eartheasy.com/about_us.htm ©2000 - 2007

http://www.hometips.com/cs-protected/guides/showerhd.html

Paul is a principal of http://www.NewHomesSection.com Search New Homes Arizona, Arizona Home Builders and Arizona Real Estate today!

Article Source: http://EzineArticles.com/?expert=Paul_Escobedo

By Paul Escobedo

Economic Growth and Poverty Reduction - Making Growth Work For the Poor

1. Introduction

The question of whether economic growth leads to poverty reduction is a subject of major contention today. The neo-liberal view to this issue is that growth is good for the poor, and that poverty can be alleviated through economic growth. In this essay, I argue that unless the poor participate meaningfully in the economy and the constraints that hinder their participation are removed, growth on its own cannot help in poverty reduction. The state should also play a major role in making the poor benefit from growth by pursuing pro-poor policies. In the subsequent paragraphs, I define what pro-poor growth is; spell out the constraints to pro-poor growth and what can be done to make growth benefit the poor.

2. Definition of concept: pro-poor growth

According to Ravillion and Datt (1991:19), pro-poor growth can be defined as ‘growth that involves and benefits the poor’. In other words, pro-poor growth requires the maximum participation of marginalized groups in all sectors. Ravallion and Datt further argue that pro-poor growth is, inter alia, characterized by what they call ‘deliberate transfers to the ultra poor who are not able to lift themselves out of poverty. In essence, the argument that they are advancing is that the poor need help or intervention in order for them to benefit from growth. This means that pro-poor growth is a deliberate intervention to make the poor benefit from growth rather than leaving the poor to the fate of the ‘invisible’ hand of the market. It has to do with setting an enabling environment in which the poor have the opportunity to participate meaningfully in the economy.

According to Kydd et al (2001:10) pro-growth will occur when the following conditions exist:

 Price or productivity increases in tradable products with high average share in the poor’s expenditure.

 Price and productivity increase in tradable products with high labour inputs by the poor.

 Changes in technology or reduced barriers of entry, allowing the poor to engage in production of non-tradables which they could not previously engage in or

 Gains in the significant numbers of non-poor, which lead to expanded demands for goods or services, produced by the poor as a result of upstream or expenditure linkages.

It is important to note that not all growth is pro-poor. Here are some of the characteristics or aspects of growth which are not pro-poor:

 Disparities in wealth distribution

 Increases in rural poverty

 Growth that ignores agricultural development despite the role that it plays in poverty alleviation

 Lack of investment in health and education, which play a critical role in poverty alleviation

 Failure to mitigate inequalities and lack of programmes aimed at addressing the needs of the poor (www.seurities.com).

As Acocella (1998:162) notes, it is critical to remember that growth does not always lead to human development. Growth may occur without any significant impact on human development, especially with regard to the poor. Acocella further argues that real development or growth occurs when there is improvement in the well being of people. Growth that does not lead to improvement in the welfare of people cannot be said to be developmental in nature. Genuine growth, as Ferro et al (2002:4) note, should lead to human development, and this entails ‘empowering the poor to contribute to and benefit from this growth’. It is clear that pro-poor growth does not occur automatically without the implementation of the right policies that will be instrumental in facilitating its manifestation. There are polices and practices that may hinder pro-poor growth from taking place. I examine a few in the next section.

3. Constraints to pro-poor growth

For pro-poor growth to occur in any society, it is important to ensure that all the barriers that prevent the poor from reaching their goals are removed. Failure or reluctance to deal with such barriers may frustrate the progress of poor people and may ultimately hinder any poverty reduction strategy from successfully addressing the issue of poverty. Here are some of the constraints that can negatively affect pro-poor growth:

3.1 Inequality and lack of access to market

It is difficult to pursue pro-poor policies in countries characterized by inequality. Stewart (1995:209) argues that it is difficult to develop pro-poor policies in inegalitarian societies. He gives an example of inegalitarian societies such as Ghana, Mexico and Philippines, where he argues that growth has not made any impact on the poor. These societies are contrasted with Indonesia ‘with a more egalitarian structure to start with and a more pro-poor pattern of growth’. Other examples given are East Asian societies, which due to their effective policies of dealing with inequality were able to reduce the level of poverty in a dramatic way. This means that there is a relationship between poverty and inequality. May (2002:2) also shows that policies of inequality pursued by the apartheid government in South Africa were not good for poverty reduction as they excluded certain groups from participating in the economy of the country. The propagation of inequality led to ‘loss of assets such as land and livestock and simultaneously the denial of opportunities to develop these assets through limiting access to markets, infrastructure and education.

The problem with inequality is that it results in social exclusion where certain groups are denied opportunities or services. The exclusion of the poor from participating meaningfully in the economy can negatively affect their well being. In an economy where inequality is low, the poor will tend to get a higher share of the benefits from growth as compared to an economy which is characterized by a high degree of inequality. As Ravallion and Datt (1997:7) show, ‘inequality in the ownership of physical and human assets are likely to influence the prospects of poor people to participate in economic growth’. Policies that are pro-poor will ensure that the poor have access to markets and infrastructure. It is clear that in cases where there is no equality amongst the different socio-economic classes, reliance on market forces and the invisible hand of Adam Smith to meet basic needs is merely wishful thinking.

3.2 Fiscal constraints

Governments, especially in the developing countries are finding it hard to pursue pro-poor growth policies and approaches for poverty alleviation due to fiscal constraints. Structural Adjustment programmes are in most instances making matters worse. The reality is that governments are usually faced with the challenge of having to reduce expenditure in social services, which are supposed to benefit the poor. This means that less money is spent on important services such as health, education and other basic services. Cuts in government expenditure directly affect the poor (Howard 2001:57). However, it is important to note that the state is faced with global challenges and constraints in its attempt to pursue policies that are good for poverty alleviation. There is global pressure for the state to take a less ‘directive’ role in the economy.

3.3 Reducing the role of the state

The liberalization of markets which goes with globalization is among other things advocating for the rolling back of the state, the repeal of restrictions on prices and on quantities moved and stored. As Howard (2001:57) rightly notes, the ‘liberalization of financial markets increases poverty and inequality’. As part of globalization, governments are forced to liberalize their markets. However, the critical question is whether liberalization of markets benefit the poor. There are mixed reactions to this. There are those who view globalization as beneficial to the poor, especially with regard to opportunities it offers for trade and new markets. On the other hand there are those who view it as harmful.

As Levinson (2001:11) shows, globalization ‘benefits the poor in some countries and harm those in other countries’. Although there is a general call for ‘rolling back the state’, in order to give way to the markets to work (if ever they work), the state has a role to play especially pertaining to things that individuals cannot do for themselves. It is common especially among the poor to find people who cannot participate in the labour market due to old age, infirmity, chronic illness or otherwise incapacitated, socially excluded or discriminated. The poverty of such people according to Streeten (1995:253) cannot be removed or alleviated by relying on the market, but by deliberate ‘pressure for social services and transfer payments and elimination of discrimination’. The emphasis on reducing the role of the state in the economy can have negative impact on pro-poor growth.

For pro-poor growth to take place, the state should play a crucial role in the redistribution of resources and opportunities through the transfer of assets, prioritization of the poor in public spending and in managing market liberalization to protect the livelihoods of vulnerable people. As Ferro et al (2002:19) point out, ‘government is an instrument of the people in the development process’. Hence government can play a crucial role in pro-poor growth by developing the right policies for addressing poverty.

4. What can be done to benefit the poor?

The following are some of the things that can be done to benefit the poor:
 There is need to focus on development of human capital, especially among the poor in order to prepare them to participate meaningfully in the economy.

 The poor must have better access to markets, especially with regard to credit

 There is need to correct biases against the poor in public spending, taxation trade and regulatory environment.

5. Conclusion

Pro-poor growth policies are essential for the meaningful reduction of poverty. The 2015 target of halving income poverty can only be achieved if countries can adopt pro-poor growth strategies. It would be difficult to attain the 2015 target without ‘pro-poor shift in distributional patterns’ (Mutume 2000). Something must be done to improve the position of the poor by providing opportunities that will make access to markets easier for them. Worth noting is that even in cases where markets work, they may not always work in favour of the poor given the constraints discussed above.

If these constraints are not dealt with or removed, growth will have no meaningful impact on the lives of the poor. There is need to learn from past failures regarding the relationship between growth and poverty alleviation. Sen (1986, cited in Sachs 1991:292) illustrate this clearly: ‘country after country has learned the hard way that the so called trickle down theory is fallacious, that growth can be immiserizing, that famines also happen in periods of boom when people’s entitlement does not allow them to buy and/or produce the food necessary to keep them alive’

Given the level of poverty in the world today, there is therefore need for change in strategy or approach in dealing with poverty reduction by making growth pro-poor. This entails, inter alia, an understanding that growth on its own cannot address poverty. The Director of the World Bank, Ian Goldin indicated the importance of pro-poor growth: ‘we have come to understand that economic growth, though necessary, is not enough to deal with poverty’ (Sunday Times, 1 September 2002: 15).

6. References

Acocella, N. 1998. The foundations of economic policy values. Cambridge: Cambridge University Press.

Ferro, M, Rosenbatt, D and Stern, N. 2002. Policies for pro-poor growth in India. http://www.arts.cornell.edu/eco/India

Howard, J.2001. Making globalization work for people. Fundamental rights at work: overview and prospects, 122: 55-60

Kydd, J, Dorward, A, Marrison, J and Cadisch, G. 2001. The role of agriculture in pro-poor growth. http://www.wye.ac.uk/Ag

Levinson. J. 2000. Globalization and poverty. University of Michigan. Ford School of Public Policy, National Bureau of Economic Research.

May, J. 2000. Growth, development and inequality, in Phillip, D (ed.). Poverty and inequality in South Africa: meeting the challenge. Cape Town and London: Zed Press.

Mutume G. 2001. Finance: are the IMF and the World Bank policies pro-poor? http://www.oneword.org/ips2/angoo.

Pieterse, J.N. 2000. Development theory: deconstruction and reconstruction. London: SAGE Publications.

Ravallion, M and Datt, G. 1999. When is growth pro-poor: evidence from the diverse experiences of India’s states? http://netec.mcc.ac.ukl/wopec/data/papers

Stewart, F. 1995. Adjustment and poverty. London: Routledge

Streeten, P.P. 1995. Thinking about development. Cambridge: Press Syndicate of the University of Cambridge.

Sachs, I. 1991. Poverty, progress and development. London: Kegan Paul International and UNESCO.

http://www.seurities.com

Article Source: http://EzineArticles.com/?expert=Isaac_Nkuna


By Isaac Nkuna